Product Details

Introduction

The vegetable and fruit belt dryer is a continuous dryer. It is easy to operate and control.

The material is evenly spread on the mesh belt by the feeder. The mesh belt is generally made from 12-60 mesh stainless steel wire, which is dragged and moved in the vegetable and fruit belt dryer by the transmission device. The vegetable and fruit belt dryer is composed of several units, and each unit is independentlyheated by the circulation of hot air. The hot air passes through the mesh belt covered with the material from bottom to top or from top tobottom, in order to complete the process of heat conduction and mass transfer. During this process, the water contained in the materialis removed, and some of the exhaust gas is discharged by the dehumidifying fan. The mesh belt moves slowly inside the chamber, and themoving speed can be adjusted according to the moisture level of the material. The number of the circulation units for drying and the numberof the layers can be determined according to the requirements of our customers.

Features

1. Jinling is a professional manufacturer of vegetable and fruit belt dryer.

2. In 2016, our company produced the belt dryer that is designed with our innovations for processing graphene specifically, and the application of this dryer achieved great success.

3. This vegetable and fruit belt dryeris widely used for drying materials with good air permeability such as flakes, strips and granules. It is particularly suitable for materials that have high moisture content, but require low drying temperature, such as dehydrated vegetables, and Chinese herbalmedicines.

4. These dryers have the advantages such as fast drying speed, high level of automation and low energy consumption.

5. For materials such as sludge and filter cake, they need to be granulated before being uniformly dried.

6. Depending on the material, different heating, air distribution, feeding and circulation methods can be selected. Different materials such as wire mesh, conveying chain mesh, non-stick mesh belt, PTFE mesh belt, punching mesh plate can be used for making the mesh belt.

7. According to the requirements of our customers, optional cleaning device, sweeping device, distributing device and dust removal device can be added to the dryer.

Flow Chart

Technical Parameters

Product Advantages

1. Different heating methods (electricity, heat pump, hot blast furnace, steam, thermal oil) and the loop heating system can be used for the dryer;

2. The length, width and number of layers of the mesh belt can be determined based on the requirements;

3. Different blowers and different structures of hot air distribution can be equipped to increase the permeability and the drying rate of the material;

4. By adjusting the settings of the mesh belt, such as the speed, material layer thickness, circulation structure, air volume, air pressure, interval temperature and exhaust gas volume, the drying efficiency can be ensured;

5. Different mesh holes, mesh plates, baffle plates, cleaning devices, and support structures can be equipped based on the requirements;

6. Optional strong magnetic deironing device can added to the dryer to remove the metal substances effectively.

Our Advantages

Professional engineers and technicians

Professional designs and proposals

Professional manufacturing and fabricating

Professional after-sales services

Professional service

FAQ

1. Q: Are you a manufacturer, trading company or a third party?

A: We are a manufacturer, and we have builded up our company since 2000.

2. Q: Can I visit your factory?

A: Yes. Our company is near Shanghai. It only takes you about 1 hour to get Changzhou. Or we can visit you in Shanghai.

3.Q: What’s the quality of your products?

A: Our products come with best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

4. Q: About the after-sale service, how can you solve the problems occurred of your overseas customer in time?

A: 24 hours timely response of mail and phone calls. The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible. If beyond 12 months, customers should bear the freight back and forth and accessories cost.

http://www.jldryer.com/